SAEVO Sonic DuoFit, Руководство пользователя

Страница: 29 / 40

29
The water volume and air flow will be able to be adjusted as required, as follows:
• Address the hand piece of the bicarbonate jet to a recipient (ex: water unit, bowl, etc).
• Actuate the command pedal and proceed the adjustments of the water volume “ selector water
(D)” and the “air flux (E)”. The water quantity when in excess provoke the diminution of the powder
effect, because of the washing. To decrease the water too much will provoke larger aggressiveness
of the powder.
The efficiency depends of the perfect dose of the water and quantity of powder.
Supply of the Bicarbonate Jet
To clean your equipment, we advise using sodium bicarbonate “Clean Okta” (exempt of registration
by the Ministry of Health) or another product with similar features:
Composition of the product: Bicarbonate of Sodium (99,6%), Anidro Silícico,
Essence - 105 spherical standard microns.
Larger information on the product, consult the manufacturer’s instructions
in the product.
NOTE: The registration in the Ministry of Health of the Sodium Bicarbonate
product (Clean Okta) is performed separately from the Jet Hand I, product is
not manufactured by Saevo.
Remove the set “reservoir and
lid” (21), pulling it upwards.
Then remove the lid (22) and
supply the reservoir (23) with
water or antiseptic liquid
in the maximum quantity
of 1 liter. After executing
the supply position the set
“reservoir and lid” (21) in the
start position.
Supply of the reservoir of the Peristaltic Pump
The noise occurring during the functioning of the peristaltic pump is inherent in the process,
coming from the mechanism of circulation of the liquid.
21
22
23
EQUIPMENT OPERATION