For your safety, keep to the following
Warning
Do not use with damaged or faulty power cord,
plug and outlet. Contact to the manufacturer.
It may cause the danger of fire, electric shock.
When unplug the power cord, hold the plug
and do not touch with wet hand. Do not use
with loosing power plug causing the danger of
electric shock and fire.
Do not bend the power cord excessively and
do not press with heavy things. It may cause
electric shock and fire.
Do not place near heat equipment and candles
or cigarette causing fire.
Close supervision needs if this product is used
by or near by the very young, the elderly or
invalid.
Do not leave children unattended in any room
where this product has benn installed.
?
Type of pretection against electric shock:
Class I equipment.
?
Degree of protection against electric shock:
Type B applied parts.
?
Classification according to the degree of
protection against ingress of water as
detailed in the current edition of IEC 60529:
Equipment: IPX0, ordinary equipment
Foot switch: IPX1
?
This equipment is not suitable for use in the
presence of flammable anesthetics or
oxygen.
?
Mode of operation: continuous operation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
other devices in the vicinity. However, there is
no guarantee that interference will not occur in
a particular installation. If this equipment does
cause harmful interference to other devices,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
-
Reorient or relocate the receiving device.
-
Increase the separation between the
equipments.
-
Connect the equipment into an outlet on a
circuit different from that to which the otther
device(s) are connected.
-
Consult the manufacturer or field service
technician for help.
Use the grounding conductor.
Breakage or electric leak may cause the
danger of electric shock.
For grounding, inquiry to electrician or to main
office.
In case of using extension cord, do not use
many electricity equipments in one time.
It causes fire and electric shock.
Do not place or set up the product in the humid
and rainy or snowy location.
It brings the danger of electric shock and fire.
Do not drop or damage the handpiece.
In case of malfunction, dropping, drowning, do
not use and contact to the manufacturer (it may
cause vibration of the bur, overheating, or
damage of the bearings).
* Use the products in proper use as per the
instruction and do not use not recommended
by the manufacturer.
* It may cause injury or property loss if not
following the instructions.
* Saeshin is not responsible for the accident
causing by not following the instructions.
