background image

Remove the water tank. Rinse tank with water and then fill 

with fresh water up to the MAX mark. Place water tank 

back into machine. To install water filter see user manual.
NOTE: Only use cool fresh water as any other liquid may 

cause damage.

 Remove the coffee bean hopper lid and slowly pour beans into hopper and 

replace lid.
NOTE:  Only use coffee beans. Ground, instant and flavored coffees may 

damage the machine.

QUICK START GUIDE

X-SMALL VAPORE

HD8645/47

SET UP

PLEASE NOTE: OUR MACHINES ARE TESTED 

WITH COFFEE AT THE FACTORY TO EN-

SURE HIGH QUALITY STANDARDS. WHILE   

MACHINES ARE CLEANED THOROUGHLY 

AFTER TESTING, IN SOME CASES, COFFEE 

GROUNDS MAY REMAIN IN THE MACHINE.
FOR FULL INSTRUCTIONS, PLEASE REFER 

TO THE USER MANUAL

1

421944059051

CONTROL PANEL QUICK REFERENCE

Please refer to the control panel reference below for an understanding of functions
18. “Double coffee” light

19. Espresso button

20. Temperature light 

21. No water light

22. Coffee button

23. Control dial 

24. Warning light

25.  ON/OFF button with 

machine ready light

Make sure the control dial is on “ ” position. Press 

the “ ” on/off button to turn on the machine; the “ ” 

light will begin to fl ash quickly, indicating that the circuit 

has to be primed.

BEFORE FIRST USE

1

21

22 23

24

25

18

19

20

TROUBLE SHOOTING

A:  The machine automatically adjusts itself after brewing a few cups of cof-

fee to optimize the extraction of the coffee to the compactness of the 

ground coffee.  We recommend brewing 3-5 espressos before drinking 

to allow for this adjustment process. Refer to the 

"Saeco Adapting Sys-

tem"

 in the user manual for more information.

A:  The coffee may be too coarse.  Change the coffee blend or adjust the 

grind. Finer coffee grounds result in stronger tasting coffee.  Refer to 

the 

“Adjusting the ceramic coffee grinder”

 in the user manual for more 

information.

A:  Sometimes water is drained automatically by the machine into the drip 

tray to manage the rinsing of the circuits and ensure optimum machine 

performance.

A:  The dispensing spout may be clogged.  Clean the dispensing spout holes.

A:  The machine’s coffee lengths can be programmed.  For details on how 

to do this please refer to the user manual.  

For more troubleshooting please refer to the User Manual. 

NEED ASSISTANCE:

If you have any questions or concerns, we are always available to assist you.  

Please call us direct at 1-800-933-7876 

or visit us at www.philips.com/saeco

 

2

9/2015

421944059051_HD8645_47_QSG.indd   1

9/3/2015   7:42:13 PM

Отзывы: