Saeco Vienna DeLuxe RS SUP 018 CR, Руководство по эксплуатации

Страница: 12 / 24

30
4 INSTALLATION
For your own safety and the safety of others,
you must strictly comply with the “Safety
Rules” described in chap.3
4.1 Package
The original packaging was designed and
made to protect the machine during
shipping.
We recommend keeping it for future
transport purposes.
4.2 Preliminary operations
• Remove the packet containing the lid,
the key for the brew group unit and the
cleaning brush from the packing
materials.
• Take the coffee machine out of its
packing and position it in a suitable
place conforming to the requisites
described in the safety rules (chap.3.)
• Fit the coffee container lid (14) onto the
coffee container (13); store the brew
group key and cleaning brush in a safe
place.
• Make sure that the tray (8) with grill, the
dump box (4) and the brew group (7)
are installed properly and that the front
door (3) is closed.
• Before plugging in the machine, make
sure the button (15) is on OFF.
If the red light (22) flashes when
you turn on the machine, it means
that one of the above-described parts
has not been correctly fitted in place.
4.3 Turning on for the first time
• Lift out the water container (2) and
remove the lid (1). Rinse it out and fill it
with fresh drinking water, making sure
you do overfill it. Lower the container
back into place inside the machine and
replace the lid.
Fill the container (2) only with
cool, still water. Hot water or
other liquids may damage the
container and/or the machine.
Always make sure there is enough
water inside the container before
starting the machine.
• Take off the lid (14) and fill the
container with whole coffee beans (13).
• Fit the lid of the coffee container back
into place.
Fill the container (13) with
whole coffee beans only.
Ground or freeze-dried coffee or any
other objects will damage the
machine.
• Insert the plug (5) into a suitable outlet.
• The button (15) is positioned on OFF.
Simply press the button (15) to turn on
the machine; the green pilot light (16)
will go on.
4.4 Priming the machine
• Position the steam tube (9) over the drip
tray.
• Press the “hot water” selector button
(19); the light (20) will go on.
• Turn the knob (11) counterclockwise and
wait until water flows out smoothly from
the steam tube; to cut off flow, turn the
knob (11) clockwise.
Note: Before starting up for the
first time, or if the machine has
i
28
27
i
Installation
30