Saeco SIN 013A, Руководство по эксплуатации

Страница: 11 / 17

23
START-UP
4 INSTALLMENT
For personal safety follow the “Safety
regulations” found on pages 20-21.
4.1 Packaging
The original packaging has been designed
to protect the appliance during
transportation.
You are recommended to keep it for later
use.
4.2 Installment requirements
Before installing the machine read the
following safety instructions carefully:
• Locate the machine in a safe place;
• Make sure that it is out of the reach of
children;
• Do not place the machine on a hot
surface or near a naked flame.
The machine is now ready to be connected
to the house electricity supply.
4.3 Electrical hook-up
Electricity can be dangerous, so
always follow the safety
regulations carefully.
The coffee maker must be connected to a
suitable wall socket.
The voltage must correspond to that
indicated on the rating plate of the
appliance.
Never use a faulty cable.
Faulty plugs and cables must be
changed immediately by authorised
personnel.
The voltage of the appliance has been
factory-set. The voltage on the rating plate
(positioned on the bottom of the appliance)
must correspond to that of your house
electricity supply.
4.4 Connecting the appliance to
the power supply
• Uncoil a length of cable from the cable
wind found underneath the appliance,
sufficient for the plug to reach the wall
socket.
• Check that the main switch is in the “0”
position before inserting the plug in the
wall socket.
• Plug the appliance into a wall socket
carrying the correct voltage.
• Turn on the main switch (3), the light on
the inside will be on.
4.5 Filling the water tank
• Remove the water tank lid (2).
• Lift out the water tank (1), making sure
you do not damage any of the tubes
inside it.
• Rinse and fill the tank with fresh water
without overfilling.
• Put the water tank back in its right
place, making sure that the tubes
removed previously are all immersed in
water.
Warning!
The tanks of some models are
equipped with a water inflow valve. This
valve closes automatically when the tank
is removed to prevent water leakage.
When putting the tank back, press lightly
on it to open the valve.
• Put the lid back on the tank.
Always fill the tank with fresh, not
carbonised water: hot water or
other liquids may damage the tank.
Do not use the coffee maker
without water, always check that
there is enough water in the tank.
Sin013a 165925300 Rev00.p65 12/05/01, 16.39 23