Saeco Minuto HD8763/31 страница 10 Скачать руководство пользователя

Страница: 10 / 84

ENGLISH

PREPARING FOR USE

Machine Packaging

The original packaging has been designed and constructed to protect the
machine during transport. We recommend keeping the packaging material
for possible future transport.

Machine Installation

Remove the machine from the packaging.

For best use, it is recommended to:

•

Choose a safe, level surface where there will be no danger of over-
turning the machine or being injured.

•

Choose a location that is suffi

ciently well-lit, clean and near an eas-

ily reachable socket.

•

Allow for a minimum distance from the sides of the machine as
shown in the fi gure.

Open the water tank lid.

Lift the water tank using the handle.

Содержание Minuto HD8763/31





















































































Результаты поиска

Содержание Minuto HD8763/31

Отзывы:

Похожие инструкции для Minuto HD8763/31

Бренды по названию

Популярные бренды

Saeco Minuto HD8763/31, Руководство по эксплуатации

Результаты поиска

Содержание Minuto HD8763/31

Отзывы:

Похожие инструкции для Minuto HD8763/31

Бренды по названию

Популярные бренды