background image

4

ENGLISH

IMPORTANT

Safety Instructions

This machine is equipped with safety devices. Nevertheless, 
read and follow the safety instructions carefully and only use 
the machine properly as described in these instructions to 
avoid accidental injury or damage due to improper use of the 
machine. Keep this user manual for future reference.

The term 

WARNING

 and this icon warn against possible 

severe injuries, danger to life and/or damage to the machine.

The term 

CAUTION

 and this icon warn against slight 

injuries and/or damage to the machine.

Warnings

•  Connect the machine to a wall socket with a voltage match-

ing the technical specifi cations of the machine.

•   Connect the machine to an earthed wall socket.

•  Do not let the power cord hang over the edge of a table or 

counter, or touch hot surfaces.

•  Never immerse the machine, the mains plug or power cord 

in water: Danger of electrical shock!

•  Do not pour liquids on the power cord connector.

•  Never direct the hot water jet towards body parts: Danger 

of burning!

•  Do not touch hot surfaces. Use handles and knobs.

•  After switching off  the machine by pressing the power but-

ton on the back of the machine, remove the mains plug 
from the wall socket:

-  if a malfunction occurs;

Содержание Minuto HD8762













































































Отзывы: