Saeco Lirika, Руководство пользователя, Страница: 10 / 56

• 10 •
Machine Use - User Manual
If the water tank is not inserted, check that no cof-
fee beans fall into the tank compartment. If this
happens, remove them to avoid any malfunctions.
3 Put the lid back on the coff ee bean hopper.
3.3 Turning on the Machine
Warning! Connection to the power supply should
be carried out exclusively by the service provider!
Before turning on the machine, ensure that the plug is correctly
inserted in the power socket.
1 To turn on the machine, set the power button on its back to
"I" (Fig.02, page 3) .
2 After carrying out a check cycle, the machine goes into
Stand-by mode and the " " button (21) fl ashes.
3 To turn on the machine, simply press the “ ” button (21).
Note: Once warm-up has been completed, the
machine performs a rinse cycle of the internal
circuits. A small amount of water is dispensed during this
process. Wait for this cycle to be completed.
3.4 Warm-up and Rinsing
1 Upon start-up, the machine activates the warm-up phase.
Wait until it is completed.
Note: The progress bar indicates that the machine
is warming up the system.
2 Once warm-up has been completed, the machine performs a
rinse cycle of the internal circuits.
Note: The progress bar indicates that the machine
is performing the rinse cycle of the system.
3
A small amount of water is dispensed from the coff ee dis-
pensing spout. Wait for the cycle to end.
Note: The cycle can be stopped by pressing the
“
” button (18).
4 Then the machine is ready for use.
Note: If the machine is used for the fi rst time or af-
ter a long period of inactivity, contact the Service
Provider to start it up.
3.5 Rinse/Self-Cleaning Cycle
This cycle allows the internal coff ee circuits to be rinsed with fresh
water. This cycle is only carried out at the end of the warm-up
phase in the following cases:
• Upon machine start-up, when the boiler is cold;
• After priming the circuit, if the boiler is cold;
• During the Stand-by preparation phase (if at least one coff ee-
based product has been brewed);
• When turning off the machine, after pressing the " "
button (21) (if at least one coff ee-based product has been
brewed).
A small amount of water will be dispensed to rinse and heat all
the machine parts; this icon is displayed.
Wait for the cycle to fi nish automatically. The dispensing process
can be stopped by pressing the “
” button (18).