32
ENGLISH
6
Let the brew group air-dry thoroughly.
7
Thoroughly clean the inside of the machine using a soft, dampened
cloth.
8
Make sure the brew group is in the rest position; the two reference
signs must match. If they do no match, proceed as described in steps
9-10.
9
Gently pull down the lever until it is in contact with the brew group
base and the two reference signs on the side of the brew group match.
10
Make sure the hook to lock the brew group is in the correct position
by fi rmly pressing the “PUSH” button until you hear a click. Check if the
hook is at the top end position. If it is not, please try again.
11
Insert the brew group in its seat again until it locks into place without
pressing the “PUSH” button.