Saeco Intelia Deluxe HD8904, Быстрый старт

Страница: 12 / 60

Cleaning and maintenance
Cleaning the brew group
Clean the brew group once per week. Check the online manual for more detailed information
about the monthly cleaning of the brew group.
1 Remove the coffee grounds container and open the service door.
2 Remove the coffee residues drawer (Fig. 27).
3 To remove the brew group, press the lever and pull the brew group out of the machine
(Fig. 28).
4 Carry out maintenance to the brew group as described in the online user manual
5 Make sure that the lever is in contact with the base of the brewing unit (Fig. 29).
6 Make sure the locking hook of the brew group is in the correct position. To position the
hook correctly, push it upwards until it is in uppermost position (Fig. 30).
7 The hook is not correctly positioned if it is still in bottommost position (Fig. 31).
8 Slide the brew group back into the machine along the guiding rails on the sides until it clicks
into position. Then place the coffee residues drawer back in the machine.
Lubrication
Lubricate the brew group after approximately 500 cups of coffee or once a month.
1 Apply some lubricant around the shaft in the bottom of the brewing unit. (Fig. 32)
2 Apply some lubricant to the rails on both sides, as shown in the illustration. (Fig. 33)
3 Slide the brew group back into the machine along the guiding rails on the sides until it clicks
into position. Then place the coffee residues drawer back in the machine.
Automatic milk frother cleaning (daily)
1 Plunge the suction tube into a jug filled with fresh water.
2 Place an empty container under the automatic milk frother. Press the HOT WATER button.
3 When the water that flows out of the automatic milk frother is clean, press the ESC button
to stop the dispensing.
Automatic milk frother cleaning (monthly)
1 Pour the contents of a Saeco milk circuit cleaning sachet into a jug. Add a half litre of water.
2 Insert the suction tube into the jug.
3 Place a container under the automatic milk frother.
4 Press the HOT WATER button.
5 You can press OK to stop or let the machine dispense until it stops automatically.
6 Rinse the jug with fresh water and fill it with a half litre of fresh water for the rinsing cycle.
Empty the container and place it back under the automatic milk frother.
7 Insert the suction tube into the jug.
8 Press the HOT WATER button.
9 You can press OK to stop or let the machine dispense until it stops automatically.
ENGLISH
12