Saeco Estrosa, Руководство пользователя

Страница: 27 / 42

MANUAL MACHINES 05 TROUBLESHOOTING
SAECO Page / 02
01
5.1 Test Mode in Estrosa and Carezza
ENTER IN TEST MODE:
The entering in Test mode is possible only disconnecting the machine from the main plug,
opening the steam knob and pressing the coffee button and the rinsing button at the
same time, connecting the machine to the main plug and keep pressed the buttons for 3
seconds.
After 3 seconds the Led Alarm and Led Descale turn on and the thermometer (only Gaggia
version)will move to reache the zero to con fi rm the entering in TEST MODE.
TEST MODE:
At this point at every button presion will be associate the turning on of one Led and the turning
on of a load for 3 seconds. In this mode it is possible to do the machine steam out.
• ON/OFF button turn on Heater and Led ON for 3 seconds (only in Gaggia machine).
• Coffee button turn on Led coffee and move the Motor for 3 seconds.
• Rinsing button turn on Led Rinsing and Pump . Pressing again the Rinsing button the
pump will turn off.
• Steam button turn on the Led Steam .
STEAM OUT:
• Push contemporarily ON/OFF button and STEAM button will turn on Led ON and the
Led Steam .
• Keep the button pressed for 3 seconds.at the end of this time the 2 led will turn off and
Led Steam starts blinking indicating that the heater is going in steam temperature.
• During the warming up some water will fl ows out from the steam tube.
• When the heater reach the steam temperature no more power is given to the heater.
The Led Steam stop blinking and stays on for 5 seconds to guarantee that the heater is
empty of water.
• At the end of the 5 seconds the Led Steam turn off to allow the user to test the next ma
chine.
• At the end of this action the machine is empty and at the fi rst power on, the circuit rechar
ge is needed.
EXIT FROM TEST MODE:
From the test mode is possible to exit only disconnecting the machine from the main plug.