English
36
Product containers
-
Lift upper door (ref.
11
, fig. 1).
-
Remove containers from their housing, lifting them lightly to
simply removing them (fig. 29).
Containers do not need a specific maintenance. However it is
necessary to clean them at least monthly making sure that at the
moment of supply they are perfectly dry.
Containers can be separated by the front silicon bushing (ref.
B
,
fig. 29) by pressing and pulling toward you the rubber clamp (ref.
C
, fig. 29) and from the rear bushing (ref.
E
, fig. 29) rotating it
counterclockwise, allowing the removal of rear pin (ref.
A
, fig.
29) and spring (ref.
D
, fig. 29).
Clean the containers using a dry rag or a jet of compressed air
and reassemble them by reversing the operations, checking that
rear pin sealing ring be perfectly intact.
Sugar container
To clean the sugar container use the same procedure, described in
the chapter “products containers” . Except for the front conveyor
(ref.
29
, fig. 29) that must be rotated and removed from its seat, in
order to be separated from the container.
Important
Clean thoroughly the duct (ref.
21
, fig. 30) and the rocker
arm (ref.
B
, fig. 30) of the sugar dispensing device.
fig. 29
99588.43
29
99588.42
C
B
E
D
Coffee bean hopper and grinder
(Standard version
only)
-
Open front door (ref.
1
, fig. 1).
-
Close mobile panel (ref.
A
, fig. 31) pulling it outwardly.
-
Dispense some coffees in order to empty the coffee grinder
from coffee beans.
-
Remove the container.
fig. 30
99588.41
21
B
fig. 31
99588.40
A
A
Содержание D.A. 8P Standard
Страница 40: ...Cod 0862 957 Ed 05 10 03...
