Saeco AULIKA EVO TOP HSC Скачать руководство пользователя страница 73

Страница: 73 / 108

US English

9.13

"Extra" products

The machine is designed to also brew products other than
those displayed on the control panel.

After pressing the "Extra"
button, if no product is
selected,

the

machine

returns to the main menu
after 10 seconds.

Press the "Extra" button to access the menu.

The "STEAM" function is
visible and may only be
selected

the

service

provider has enabled this
option. Otherwise, it is not
available.

The display shows the page for "Extra" beverages.

In this menu, you can just
brew one product at a
time.

brew

products,

repeat

the

described procedures.

Select the desired beverage by pressing the "UP" button or
"DOWN" button.

When the desired beverage has been selected, press the
"OK" button to start the preparation.

Refer to the section describing
the brewing procedure for the
desired beverage.

order

prepare

milk-based

beverages,

install the Cappuccinatore
after

washing

described in the "Cleaning
the Cappuccinatore (After
Each Use)" section.

Long Coffee

This programme allows you to prepare a long coffee.
Press the "Extra" button to access the menu.

Place a suitable cup under the coffee dispensing spout.

Press the "OK" button to start the preparation.
After brewing, remove the cup of coffee.

Содержание AULIKA EVO TOP HSC













































































































Результаты поиска

Содержание AULIKA EVO TOP HSC

Отзывы:

Saeco AULIKA EVO TOP HSC, Эксплуатация и обслуживание, Страница: 73 / 108

Результаты поиска

Содержание AULIKA EVO TOP HSC

Отзывы: