)$925,7(&+$11(/352*5$00,1*
GENERAL INFORMATION
The MINIMAX can store up to 9 favorite channels in each channel plan. You may store
channel numbers and/or frequencies in any order and combination.
Favorite channels can be programmed in the normal analog channel mode or digital
channel measurement mode. Favorite channels are measured as either digital, if in the
digital mode, or analog, if in the normal analog mode.
To enter the Favorite Channel Mode, you must first program one or more favorite chan-
nels, and then recall one of them.
Once in the Favorite Channel Mode, pressing the UP/DOWN keys will switch in the next
programmed favorite channel. Any unprogrammed slots will be skipped and the unit will
loop from the highest to the lowest slot.
You can perform the C/N, Hum, CH/FRQ, and
▲
PA functions using your favorite chan-
nels. You can also change the Optional User Settings for the Auto shutoff, Volume, Beep
ON/OFF, and dBmV - dBuV in the Favorite Channel Mode.
To exit the Favorite Channel Mode, press ESC, tune a channel using a valid channel
number followed by CH/FRQ, or select a new channel plan.
Note: When in the digital channel measurement mode all favorite channels are meas-
ured as digital even if they were programmed in the normal analog mode.
PROGRAMMING FAVORITE CHANNELS AND FREQUENCIES
1. Tune the meter to the channel or frequency you wish to store.
2. Select the Favorite Slot (1 - 9) you wish to store it in, press FAV, then press ENT.
Example: Store CH 2 Picture, EIA (Table 1) into Favorite Slot #1.
Make sure the desired Channel Plan has been selected.
Enter 2
Enter CHN/FRQ
Enter
▲
PA to select Picture if necessary
Enter FAV
Enter 1
Enter ENT
Example: Store 67.250 MHz into Favorite Slot #2
Enter 67.250
Enter CH/FRQ
Enter FAV
Enter 2
Enter ENT
Repeat the above procedures to program additional Favorite Channels.
Note: Programming a Favorite Channel does not switch the meter into the Favorite
Channel Mode. This can only be done by recalling a previously programmed Favorite
Channel.
16
