SAFETY INSTRUCTIONS
Please follow the following instructions to ensure
that the module is used safely.
This module is NOT intended for use in a humid or wet environment.
Should liquids or other conducting substances get into the module, the
module should be disconnected from mains power immediately, dried,
examined and cleaned by a qualified technician.
Transport the module carefully, never let it drop or fall over. Warranty
does not apply to modules with visual damage.
The module has to be shipped in the original packaging only. Any module
shipped to us for return, exchange and/or warranty repair has to be in its
original packaging. All other deliveries will be rejected and returned to you.
Make sure you keep the original packaging and technical documentation.
This device complies to the EU guidelines and is manufactured RoHS
conforming without use of lead, mercury, cadmium and chrome.
Nevertheless, this device is special waste and disposal in household
waste is not recommended.
The module is developed in collaboration with Erica Synths and is
manufactured in Latvia.
You will find the Sacrament terms of warranty at
www.ericasynths.lv
Items for return, exchange and/or warranty repair must be
registered at SUPPORT on www.ericasynths.lv and sent back
to us according to the instructions in the support page.
Made in Latvia.
User manual by Nero Bellum.
Design by Ineta Briede@black8
Copying, distribution or any commercial use in any way is
prohibited and requires written permission from Sacrament.
Specifications are subject to change without notice.
Do not expose the module to temperatures above +50
°
C or below -20
°
C.
If the module has been exposed to extreme low temperatures, leave it in
room temperature for an hour before plugging it in.
