SACKit Rock 250, Руководство пользователя

Страница: 8 / 33

8
LED battery functions for SACKit Rock 250 case
When earbuds are charging in
case - LED function
Indication of LED function
1 blink 0-25% power on the case
2 blink 25-50% power on the case
3 blink 50-75% power on the case
4 blink 75-100% power on the case
LED off Fully charged earbuds
When case is charging by plug or
wireless - LED function
Indication of LED function
1 blink 0-25% power on the case
2 blink 25-50% power on the case
3 blink 50-75% power on the case
4 blink 75-100% power on the case
LED on Fully charged case
RESET SACKit Rock 250
A video tutorial of how to reset your SACKit Rock 250 earbuds can be found at SACKit’s YouTube
channel: https://bit .ly/34TWCjk
1 . Before you reset make your device forget SACKit Rock 250 in Bluetooth settings on your device
2 . Turn Bluetooth OFF before resetting SACKit Rock 250
3 . Place both earbuds in the charging case
4 . Take both earbuds out of the charging case
5 . Follow bellow steps one earbud at a time
Reset ROCKit
Pairing mode Reset
Connects automatically
Click and hold
Power off
Click and hold
Power on
Click and hold
R
Click five times
TIPS: red and white LED
quickly flash alternately
TIPS: red and white LED slowly flash alternately
L
05
05
R
05
R R
L
05
L L
03
03
After reset, L earbud will automatically
enter the pairing mode with red and white
LED, then the phone can search for earbuds.
ROCKit L
Select on phone
Click 5 times quickly. When
you see a red flash, the
earbud has been reset . This
might require several attemps.
Click and hold
for 5 sec. until
earbud flash red
and turns off.
Click and hold for
5 sec. until earbud
flashes red and
white continuously.
6 . When both earbuds are reset, put them back into the charging case and wait 10 sec . before ta-
king both earbuds up at the same time. The earbuds they will automatically pair with each other.
7 . Now folllow “How to pair SACKit Rock 250 earbuds with Bluetooth devices” on page 6 .
It did not work? Okay, first and foremost: Do Not Panic! Your SACKit Rock 250 will work just fine if
you follow these steps:
• Has the LED on the earbud turned red? If the LED has not turned red the earbuds have not been
reset correctly. It is essential that the 5 taps happens quickly, this may take a few tries.
• If the LED tuned red, it worked! Your earbuds have been reset. You now have to put them back
into the charging case for 10 seconds before they are ready to reconnect .