Saci VSD magnus, Руководство по установке и обслуживанию

Страница: 25 / 164

ENGLISH
25
6 MAIN SCREEN
This screen will show the current status of the pump:
You can directly view the instantaneous rotational frequency of the motor, the pressure of the installation
(only if the pressure transducer is installed) and the instantaneous consumption of motor. In brackets, just
to the side of the instantaneous consumption, you can see the nominal consumption of the motor entered
in the start-up wizard (point 8 of this manual).
From this screen, if you click on the keys ( ) or ( ), you can directly access the display menu. This acts a
short cut for checking data you need view without having to access the settings menu.
7 OPERATION MODE
Like all pumps designed for swimming pool filtration, its main objective is to keep the water clean and
in optimum condition. Its main characteristic and new feature is that, with the logic of the speed variator,
this process achieves high energy savings thanks to simple and intuitive management software, providing
greater protection for the pump, and completely eliminating the need to install a conventional electric panel.
The system it allows one single pump to operate in an installation, or a variety of pumps connected together
in parallel (up to 8 pumps) using its speed variator.
We have a daily setting of various filtration sequences (up to 4 sequences every day), in which we can also
indicate how many pumps participate in this filtration (if there is more than one pump installed), and the
operating frequency of the pumps.
You can configure the settings for the days needed from the menu to alternate the operation of the pump(s)
that will be involved in the filtration (from 1 day to 14 days).
The default of pump operation mode is filtration. Once time bands and the days of the week on which
filtering is required have been indicated, the pump(s) will filter at the frequency indicated for each band. It is
here where we must take into account that the longer the time the greater the energy savings.
If there is a pressure transducer installed, the system will monitor the pressure of the installation at all times,
to warn if it detects excess soiling in the filter. Once this warning has been received, or at any other time,
when the button “BACK WASH” is pressed, a simple wizard will guide you through the installation filter
cleaning. This wizard will tell you to move the filter valves to cleaning mode, then rinse and finally back to
filtration.
S A C I P U M P S < e > p o o l
H z 3 5 . 0 B a r 0 . 8
A m p 4 . 1 ( 8 . 0 )
1 5 : 5 9 ( M 2 ) M e n u
VSD Magnus - [e]Magnus
VSD Magnus - [e]Magnus