ENGLISH
25
ENGLISH
Product
family
Maximum motor
current
Frequency converter power supply:
M=Single phase T=Three phase
Motor output:
T2=Three phase 230V T3=Three phase 400V
2. TECHNICAL DATA
Nominal values:
Limits of use:
- Minimum ambient temperature: -10ºC
- Maximum ambient temperature: +40ºC
- Variation in the supply voltage: +/- 10%
3. PRODUCT IDENTIFICATION
E - M O T I O N M T 2 - 1 1 A
4. INSTALLATION AND ASSEMBLY
Before installing the frequency converter, carefully read the whole of this manual and consult the
safety rules valid in each country.
a) Installation of the frequency converter:
- It must be installed in a well ventilated area, protected from damp and direct exposure to the sun and rain.
- Before making the electrical connections, ensure the cable used to provide power to the frequency converter is not
live.
- Carefully verify the electrical data indicated in the specifications plate of the frequency converter before
connecting the electric current.
- The electric power cables to the frequency converter, and from the frequency converter to the pump, must be of
the correct size for the nominal consumption of the motor and the length of cable required. A table with the
maximum recommended lengths according to the cross-section of the electrical cable can be found below.
Power supply voltage (V)
Motor voltage (V)
Working frequency (Hz)
Maximum current at frequency converter output (A)
Maximum current at frequency converter input (A)
Protection rating
220-240 V single phase
230 V Three phase
50/60 Hz
11 A
20 A
IP 55
E-MOTION MT2-11A
400 V Three phase
400 V Three phase
50/60 Hz
11 A
12 A
IP 55
E-MOTION TT3-11A
Manual Variador [e]-MOTION_SACI 12/07/16 20:05 Página 25
