Manual
Vario Pedestal 2-75
- 4 -
By turning the steering wheel a full 180°, the
steering column automatically engages into the
steering mechanism of the dolly.
3.1.3 Steering wheel
The steering wheel is attached to the upper gear
box with three screws. To lock it use the enclosed
4 mm hexagonal key, which is located at the side of
the dolly.
Movable red clips, which serve as indicators for the
running direction, are located on the steering wheel.
3.2. Camera setup and column pressurizing procedure
Turn the steering wheel so that the recess for Quickfix
operation is accessible (the two red arrows meet).
A 6 mm hexagonal key is located next to the dolly’s trans-
port boxes for trim weights opens the Quickfix camera
head lock. When opened, the red indicator pins move out.
Fit the pan and tilt head, close the Quickfix (the red indica-
tor pins move in).
Caution:
The Quickfix lock will accept all Sachtler flat
base heads directly or via adapter. Check for
compatibility before attempting to fit another
manufacturer’s head.
Only after the complete camera equipment
payload is mounted on the column (max. 75 kg
/ 165 lbs) the transport lock can be opened by
depressing the column and disengaging the
locking lever.
Caution:
Should the transport lock be released without
a load, the column will rise quickly (and
possibly dangerously) by itself.
