- 5 -
Reporter 400D
Manual
3.8
Changing the safety glass
The safety glass protects against UV radiation and against
glass and bulb pieces caused by lamp damage. If the
safety glass is noticable damaged (deep scratches or
leaps), it has to be replaced.
Remove the four cross-recessed screws at the cover, then
remove the cover itself. You can now remove the safety
glass. Be sure that you don’t remove the cover of the
contact pin. Place a new silicon ring around the new safety
glass and position it into the reflector housing. Place the
cover and fix it with the four cross-recessed screws.
Test the function of the contact pin (lamp shut-off if
lamphouse is opened).
Reflector housing
Focus housing
Contact pin1
Safety glass with
silicon ring
Cover
Cross recessed screw
Diagram 2
