Sachtler FSB Mk II, Руководство пользователя

Страница: 10 / 28

8
Installation
Mounting to a Tripod
1 .
Apply the horizontal and vertical
brakes and hold the head firmly with
one hand.
2 .
Remove the tie down and place the
fluid head on the tripod refitting the
tie down loosely.
Mounting the Fluid Head
The fluid head is designed to be installed onto Sachtler 75 mm ball
base tripod using the tie down.
PrismBubble
The fluid head is fitted with an illuminating bubble level which allows
easy levelling in poor lighting conditions. It also illuminates the drag
controls.
The head also features a prism to view the bubble when the head is
too high to view from above. This Prism also incorporates the On / Off
switch.
In addition the PrismBubble may be lit on its own or with the control
LED’s to enable setup up in low light conditions.
The illumination will be
activated by pushing the
bubble prism window.
1. Pressing the window
briefly will turn on the
level bubble LED for
approx.10s ± 1s.
2. Pressing and holding
the window for >1s will
turn on the level bubble
LED and all control
(drag) LED’s for 20s
± 2s.
3. Pressing the window
again when any of the
illuminations are on, will
turn every LED off.