Sachtler ENVARIO Ped 1-70 Pedestal Скачать руководство пользователя страница 4

2

Safety

Important information on the safe installation and operation of 

this product. Read this information before operating the product. 

For your personal safety, read these instructions. Do not operate 

the product if you do not understand how to use it safely. Save 

these instructions for future reference.

Warning Symbols Used in these Instructions

Safety cautions are included in these instructions. These safety 

instructions must be followed to avoid possible personal injury and 

avoid possible damage to the product.

!

WARNING!

Where there is a risk of personal injury or injury to others, 

comments appear supported by the warning triangle 

symbol.

Where there is a risk of damage to the product, 

associated equipment, process or surroundings, 

comments appear supported by the word ‘

CAUTION

’.

Health and Safety

Intended Use

The VARIO 1-70 pedestal is designed for use in television studios 

or OB applications to support and balance a fluid head, camera and 

ancillary equipment weighing up to 70 kg (154 lb).

This product is intended for use on an unobstructed and reasonably 

level surface by television camera operators.

Mounting and Installation

!

WARNING symbols on the pedestal

On encountering the warning triangle and open book 

symbols it is imperative that you consult this operators 

guide before using this pedestal or attempting any 

adjustment or repair.

!

WARNING! 

Before fitting, adjusting, or removing the 

payload, the elevation column must be lowered to a safe 

working height and wheel brakes must be applied

!

WARNING! 

An abnormal or unbalanced payload can 

cause the product to become unstable. Strictly adhere 

to the payload guidelines and mounting instructions 

presented in this user guide

!

WARNING! 

When mounting the payload, sufficient 

clearance must be provided below the mounting platform 

to prevent the risk of collisions or trapping injuries when 

the column is lowered.

!

WARNING! 

The product has been designed for mounting 

a payload consisting of camera support equipment only. 

Under no circumstances should the product be used for 

the transportation or support of personnel.

!

WARNING! 

Risk of product instability when moving the 

product with the elevation column fully extended. Reduce 

the height of the elevation column to a safe lower level 

before attempting to move the product.

!

WARNING! Risk of personal injury or injury to 

others

. All personnel must be fully trained and adhere to 

correct manual handling techniques and Health & Safety 

regulations. It is the responsibility of the local organisation 

to enforce safe working practices at all times..

!

WARNING! 39.5 kg / 87.1 lb LIFTING ASSISTANCE 

REQUIRED

. Do not lift this product without the assistance 

of another person or a lifting hoist capable of safely lifting 

the product.

Содержание ENVARIO Ped 1-70 Pedestal









































Отзывы: