Publication Part No. S2080-4982/0
www.sachtler.com
Place the camera plate with the slider fitted into the dovetail and lower into
place.
It will lock automatically and the lock lever will click audibly back into its
initial position.
Note! The Tripod and slider has been removed from the diagram for clarity.
Firmly lock the plate in position using the red clamp knob.
To level the assembly pull the lever until the adaptor moves freely,
do not pull the lever too far as the adaptor could be released from
the tripod.
With the lever held in the mid position centre the bubble and
release the lever back into the locked position.
Locked Position
Unlocked position
Levelling Position
When head is fitted to the slider you may use the same procedure
to fine adjust and check the level.
When fitting an aktiv head onto the the slider, adaptor S2080-0003
(75mm head) or S2080-0004 (100 mm head) will be required.
