7
EN
Assembly
Attaching the mid-level spreader 75 HD
1.
Hold each spreader arm between thumb and forefinger, then using
the other hand squeeze the red attachment button.
2.
Align the spreader hook with the tripod leg from underneath and
release the red attach/release button to lock the spreader arm in
place.
Attaching the rubber feet 75
1.
Place the rubber foot between the spikes. Check the markings on
the foot for orientation. The ‘INSIDE’ marking must be turned
towards the centre of the tripod.
2.
Push down firmly on the leg, put your fingers through the larger
loop, and pull the rubber pull-loop over the latching nose.
CAUTION!
Ensure that the red attach/release button is fully
out after attaching the spreader to the tripod. Failure to
attach the spreader correctly could cause damage to the
equipment.
