SachsenRad E-Racing Bike R8 Flex II, Руководство пользователя

Страница: 8 / 36

8
2.2 Required tools
3x allen key
1x multi-open-end spanner
1x screwdriver
OT INCLUDED IN DELIVERY:
Air pump with car valve
Please bring the tyre pressure of the front and rear wheel to at least 2.8 bar with the help of an air pump
BEFORE THE FIRST RIDE. Attention: Tire pressure should not be higher than 3.5 bar!
Note: For transport reasons, we can only deliver the e-bike with very low tyre pressure. Do not ride without first
inflating the tyres!
2.3 Installing the front wheel
Remove the black plastic covers on the left and right of the front wheel that were used to secure it for transport.
Carefully loosen the cable tie on the spoke with which your quick-release axle is attached.
Unscrew the nut of the quick release axle including a spring, put the quick release axle through the axle of the
front wheel.
Now carefully insert the front wheel between the legs of the suspension fork. Pay attention to the direction of