54
55
SFM 649 046.1
5
6
7
SFM 649 044.1
3
1
2
4
MAINTENANCE
Changing the bulbs
NOTE
Use only tested, incandescent bulbs with
the ‘E’ designation. Use of non-approved
bulbs will void the operating license. Do
not touch the bulbs with bare fingers. Hold
bulbs with a clean, dry cloth when installing
or removing them.
Headlight
1 = low beam
bulb
S3 12V 15W E9
2 = low beam
bulb
S3 12V 15W E9
3 = Position light
bulb
12V/3W
- Remove the screws (4) on both sides.
- Detach the rubber cover (5) from the
headlight.
- Release the holder clamp (6) and remove
the bulb (7).
- Pull the position light (3) with the bulb
holder carefully out of the headlight
housing and remove the bulb (7).
- Assemble in reverse order.
NOTE:
When assemble, bend the holder clamp (6)
for a safety contact.
