© 2018
Step 2 of 2
Order #XXXXX VK-0002 Attachments
2
3
7A
7B
Wing
Wing
Graphic Header
Graphic
Sign
Steps:
1) Connect graphic header to Velcro on assembly [7A/7B].
2) Attach wings to A-10 clamps on verticals [2] and [3].
3) Attach graphic sign to vertical [3], using standoffs and screw caps.
See
Graphic Sign
detail.
Completed Assembly
*
Connector
Graphic Sign
Cap
Graphic
Standoff
Setscrew
Slide connector into groove of extrusion. Tighten
set screw to secure in place. Screw standoff into
connector. Place graphic between standoff and cap
then secure graphic to standoff, using cap.
