Accessories
1
、
2 x 5V Power Adapter
2
、
1 x User manual
Power Adaptor
Physical Connection Picture
：
Figure 1.0 Front Panel Picture
Cat: Use one cat to connect the sender and the receiver.
Switcher: This button needs to be pressed if digital display cannot read EDID info
Steps to use the Switcher button:
1. Connect the power adaptor with the power port on the HDMI extender
2. Connect the HDMI output on the HDMI extender with the HDMI input port of the display.
3. Make sure you select the correct input channel on device.
4. Press the Switcher button on the HDMI extender and wait for device to read EDIF info, once
finished status LED light should go green.
5. Take the HDMI cable out and power off with the HDMI extender; it can be used in normal
mode.
Note: Extender can used with HDMI-DVI cable for DVI Monitor. The step is same as above.
