EC-SNVE quick installation guide
6
1. Make sure to disconnect the cable before opening the enclosure.
2. If you are using an SSD that already has a file-system and data on it, it should appear
under your Computer after a few seconds of being powered on. In some cases, it may
take up to 30 seconds.
NOTE: There are some exceptions. For instance, if you are trying to use an SSD that
was pulled from a Linux or an Apple computer on a Windows computer, it might not
work. This has nothing to do with your Sabrent enclosure, it happens because the
Windows operating systems is not capable of seeing the file-system that is used in
Linux or Apple computers.
USING A SSD WITH DATA ON IT
• Open Disk Management with administrator permissions.
To do so, in the search box on the taskbar, type Disk Management, select and hold (or
right-click) Disk Management, then select Run as administrator > Yes. If you can't
open it as an administrator, type Computer Management instead, and then go to
Storage > Disk Management.
• In Disk Management, right-click on the disk that appears Offline, then click Online
(shown next).
DRIVE IS CONNECTED BUT MISSING IN FILE EXPLORER