Sabre 4SISON BLAX2-M-EU, Оригинальное руководство пользователя

Страница: 34 / 48

EN - 10
care and keep it clean.
b) Store the machine in a dry place
out of the reach of children.
c) Always allow the machine to cool
before storing.
d) Replace worn or damaged
parts for safety. Use only
genuine replacement parts and
accessorises.
e) Never attempt to override the
interlocked feature of the guard.
VIBRATION AND NOISE
REDUCTION
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-
noise operating modes as well as
wear personal protective equipment.
Take the following points into
account to minimise the vibration
and noise exposure risks:
• Only use the product as
intended by its design and these
instructions.
• Ensure that the product is in good
condition and well maintained.
• Use correct attachments for the
product and ensure they are in
good condition.
• Keep tight grip on the handle.
• Maintain this product in accordance
with these instructions and
keep it well lubricated (where
- if the machine starts to vibrate
abnormally, for immediately
check.
j) Do not tilt the product while the
power source is running.
k) Walk, never run.
l) Never operate the product near
open windows,etc.
m) Operate the product only in
daylight or in good artificial light.
n) Do not blow hard objects such
as nails, bolts, or rocks.
o) Apply extra care when cleaning
debris from stairs or other tight
areas.
p) Follow below recommendations
when using the product:
• Use rakes and brooms to loosen
debris before blowing.
• Use the full blower nozzle
extension
4) Maintenance and storage
a) When the machine is stopped
for servicing, inspection, or
storage, or to change an
accessory, shut off the power
source, disconnect the machine
from the supply and make sure
that all moving parts are come
to a complete stop. Allow the
machine to cool before making
any inspections, adjustments,
etc. Maintain the machine with