Sabo SABO 108-17 HS Скачать руководство пользователя страница 52

Страница: 52 / 64

Troubleshooting - 48

TROUBLESHOOTING

Belt Slipping

Debris in sheaves.

Worn belt.

Too Much Vibration

Debris on mower deck or in sheaves.

Damaged sheaves or sheaves out of alignment.

Damaged drive belt.

Blades out of balance.

Blades Scalping Grass

Cutting too low.

Mower wheels not adjusted correctly.

Turning speed too fast.

Ridges in terrain.

Rough or uneven terrain.

Low tire pressure.

Mower Loads Down Tractor

Engine rpm too low.

Travel speed too fast.

Debris wrapped around mower spindles.

Uneven Cut

Mower deck not leveled properly.

Travel speed too fast.

Blades dull.

Mower wheels not adjusted correctly.

Tire pressure unequal.

Grass Tips Are Jagged And Turn Grayish Brown
After Mowing

Dull mower blades.

Mower deck not leveled properly.

Mower (Or Other Attachment) Stops When
Reverse Foot Pedal Is Depressed And Attachment
Is Engaged

Normal condition. (See Using Reverse Implement Option in the
OPERATING Section.)

CHECK

Содержание SABO 108-17 HS

































































Результаты поиска

Содержание SABO 108-17 HS

Отзывы:

Sabo SABO 108-17 HS, Руководство оператора, Страница: 52 / 64

Результаты поиска

Содержание SABO 108-17 HS

Отзывы: