Sabio 2010D, Инструкция по эксплуатации

Страница: 12 / 161

Introduction
Page 1-5
Ozone Generator:
• Output range 2ppb - 1000 ppb, Max - 6 ppm F lexcal instrument flow
(Optional extended output range 0.05 -1 PPM at 10 SLPM instrument flow)
• Accuracy± 1% of Set Point or ± 2 ppb @ 5 SLPM
• Nominal ozone flow of 100 SCCM maintained 1 SCCM by
precision flow controller
• UV lamp maintained at 50 ± 0 .1 °c
• Optional UV optical servo control loop
• Optional UV absorption photometer
Internal UV Absorption Photometer Option:
• Ozone monitoring ranges 100 PPB to 20 PPM full scale
• Lin 1 PPB or + 1 percent of full scale, whichever is
greater
• Precision + 1 PPB
• Lower detectable limit 0.8 PPB
• Zero drift for 24 hours and 30 days less than 1 PPB
• Span drift for 24 hours and 30 days less than O. 5 percent of reading
• Lag time less than 10 seconds
• Rise and fall time of 95 percent of final reading less than 60 sec
at 500 SCCM sample flow rate
• Nominal flow rate of 500 SCCM monitored by mass flow meter
• Internal sample vacuum pump
• Recorder and data acquisition system analog outputs
• Operating temperature 5
0
- 40 oc
Calibration Definitions:
• Twenty user defined calibration sequences with up to 20 points per
sequence
• Calibrations may be gas blends, ozone or GPT
• Two diluent gas definitions and 20 source gas standard definitions
• Twenty timer-driven calibration routines that perform predefined
calibration sequences on a calendar of events