SABINE SWM4000 Series, Руководство по эксплуатации

Страница: 9 / 18

7
Sabine SWM4000 Smart Spectrum
®
Wireless
LIT-SWM4000-OG-EN-100205.indd
© 2010 Sabine
, Inc.
Changing Batteries
Expected life for an Alkaline battery is approximately 8 hours.
Change batteries when the battery bar in LCD display is empty, as shown below:
Antenna (replaceable)
LCD screen
On-off/mute switch
Press and hold to turn on or off. Press and release to mute or un-mute.
Set switch
Battery cover
IR port - Receives infrared beam to synchronize frequencies.
When using multiple systems, only one transmitter IR port should be exposed at a time.
Gain adjustment switch
Mute indicator - Red: mute on
TA4-F microphone input jack
Clip the transmitter to a belt until the belt is pressed
against the base of the clip.
1. With the power on, press and hold the set button until the GROUP and CHANNEL
displays begin to alternate.
2. To change the group setting, release the set button while GROUP is flashing. While
GROUP is flashing, pressing set increases the group setting by one.
3. Press power button to switch between GROUP and CHANNEL settings.
Remember to press power and set button to confirm when the setting is completed.
Press the power and set buttons simultaneously to lock or unlock the transmitter settings.
When locked, the current settings cannot be changed manually.
Indicates charge remaining in transmitter batteries.
Programming the Beltpack Transmitter
Controls
B1
B2
B3
B4
B5
B6
B8
B7
B9
B5
B1
B2
B3
B4
B6
B7
B8
B9
SW40-T
Beltpack Transmitter
Wearing the Beltpack Transmitter