NAVIGATOR System Processor
Operating Guide Addendum
080211
Navigator-OpGuide-ADD-080211.indd
© 2008 Sabine
, Inc.
13301 NW US HWY 441, Alachua, Florida 32615-8544 USA
(386) 418-2000 Fax (386) 418-2001 www.Sabine.com
New Features in All Models
If your Navigator has this option installed you will control this function in one of two ways:
NAV240, 360, or 480, active or blank front panel:
There are up/down push-button switches on the
back panel for setting mic or line level for each
input.
NAV4802, 8802, active or blank front panel: You
will need to use the Navigator Remote Control
software to control these switches. Choose “Mic
Preamps’ from the Function menu.
To access the front panel controls for Mic/Line
switching press the Global button and scroll using the Menu keys to the
“Mic Preamp”
menu.
Navigators with a D in the part number have the optional Digital
I/O installed. This option is only available with the 4802 and
8802 series units. Controls for the Digital I/O appear as menu
items in both the front panel and the remote control software.
Note that you can mix analog and digital inputs and outputs
on your Navigator.
To access the front panel controls for the digital I/O press
the Global button and scroll using the Menu keys to the
“I/O
Mode”
menu.
All Navigators can have this option added, and it appears as
an R in the part number. This option allows you to control your
Navigator with the NAVRC-100 Wall Panel Controller, which
must be purchased separately. As in the Digital I/O, controls
for the Wall Panel connection appear in both the front panel
and the remote control software.
Setting the wall panel involves choosing the mode for the
Navigator and setting the total number of wall panels that will
control this Navigator. See the operating guide for a complete
explanation of this procedure.
To access the front panel controls for the digital I/O press the Global button and scroll using the Menu keys
to the
“Panel”
menu.
You may notice a function in your NAV4802 or 8802 called “AutoMix.” For now this feature is disabled. When
it is released you will have priority-based input auto mixing with very flexible controls by simply upgrading
your Navigator firmware. See the operating guide or visit the Sabine website for this procedure.
Mic/Line Switching (M option)
Digital Input/Output (D option)
Wall Panel Remote Ready (R option)
AutoMixer - Preliminary Release