1
3
2
4
5) Place the mast plate on the plate shim kit.
6) Insert the 4 Button head screws M8x35mm [MH016] with the 4 washers
Ø16XØ8.40X1.4 [MHW032] and tighten them.
6
[MHW033]
lithium grease
www.sabfoil.com
SAB Heli Division s.r.l. - Via Guido Rossa 7/9, 47030 San Mauro Pascoli (FC), Italy -Tel +39 0541931612 - VAT 03976400402
MOSES PLATE SHIM KIT
MANUAL
REQUIRED HARDWARE
[MHW025]
:
-Self-tapping screws M5X25mm
-Washers
Ø6.4x
Ø
12x1.6mm
SABFOIL warrants this product to be free from major defects in material or workmanship to the original purchaser.
The warranty is valid only when this product is used for normal recreational activities and does not cover damage caused by use in shallow water or rocks,
unauthorized repair, changes, modifications and not correct maintenance.
SAB Heli Division s.r.l. decline all liabilities for injuries or damage due to any use of their products.
Assembly of footstrap
[MHW055-1]-Quick mounting plate (x1)
Assembly of mast
REQUIRED HARDWARE
[MH116]
:
-Button head screws M8x35mm
-Special t-nuts
-Washers Ø15.70XØ8.50X1.5
[MHW054]-Nuts (x4)
[MH032]-Flat head screws M4x25mm (x4)
4) Choose your favorite position and screw in completely
SABFOIL quick mounting kit
allows to assemble and disassemble the mast very easily, keeping the
nuts always in the same correct position for a perfect fit every time.
2) Place the quick mounting plate [MHW055-1] on the board in the correct position
3) Insert the 4 flat head screws M4x25mm [MH032] without fully tightening
Insert the 4 special nuts [MHW054] in the rails slot
1) Insert the 4 nuts [MHW054] in the rails slot
5
Place the mast on the
plate shim kit
Choose favorite position
[MHW033]
Lithium grease
QUICK MOUNTING KIT MANUAL
2
Moses quick mounting kit
it allows to assemble and disassemble the mast very easily, keeping the
nuts always in the same correct position for a perfect fit every time.
4) Choose your favorite position and screw in completely
2) Place the quick mounting plate [MHW055-1] on the board in the correct position
3) Insert the 4 flat head screws M4x25mm [MH032] without fully tightening
1) Insert the 4 nuts [MHW054] in the rails slot
[MHW054]-Nuts (x4)
Choose favorite
position
[MHW055-1]-Quick mounting plate (x1)
[MH032]-Flat head screws M4x25mm (x4)
5) Place the mast plate on the quick mounting plate
6) Insert the 4 Button head screws M8x35mm [MH016] with the 4 washers
Ø16XØ8.40X1.4 [MHW032] and tighten them.
Place the mast on
the quick
mounting plate
[MH016]-Button head screws M8x35mm (x4)
[MHW032]-Washers Ø16XØ8.40X1.4 (x4)
SAB Heli Division s.r.l. - Via Guido Rossa 7/9, 47030 San Mauro Pascoli (FC), Italy -Tel +39 0541931612 - VAT 03976400402
Check the latest version
of this manual
