29
11
Patch covered with dirt.
7.
Figure
11
is not a wrong decision
but the heat patch is dirty and if
this heat patch was activated, the
activated region is covered and
hence it could have been a wrong
decision.
8.
If this happens flag the image and
in the next milking cycle clean or
replace the heat patch.
9.
Figure
12
is an exception that
could happen and unfortunately
this will result in the camera making
the wrong decision and a heat
could be missed. This is not a
camera fault as the heat patch is
on an angle and cannot be read
correctly.
10.
As it can be seen from Figure
12
the camera can only see one side
of the blue and a line of red due to
the heat patch being on an angle.
11.
After milking this should be picked
up during your image review and
heat records should be corrected
accordingly.
12
Wrong decision made due to patch falling
to the side.
Содержание Heat In-race
Страница 1: ...Saber TM Heat In race Product Guide Control Vision ...
Страница 30: ...Notes 30 ...
Страница 31: ...Notes 31 ...
