Number/Item
Name
Description
1
EQ/Tone Control
Helps to adjust the characteristics of the sound. Adjust to
taste.
2
Heat Sink
Allows heat dissipation from the electrical components
inside. You may find it warm during operation. It’s perfectly
normal.
3
RCA Input
RCA Input for Audio Source. Cable provided.
4
Left Out
Use RCA Male to Male connectors (supplied) to connect
the right speakers to the Left one.
5
Power Connect Jack
Connect the power cable supplied into this jack
6
Fuse
Prevents electrical damage during high voltage supply
7
Power Switch
You can turn on or off your speakers system.
8
LED Power Indicator
Orange LED Indicates power.
9
3.5mm Aux Input
Audio Source. Cable Provided.
Troubleshooting
If there is no sound from your speakers, check these settings:
● Make sure a signal source is connected and producing sound.
● Make sure the POWER INDICATOR is illuminated on the front of the speaker.
● Make sure the VOLUME CONTROL is not set to the full counter-clockwise minimum
position.
● Confirm the power cable is connected and the POWER SWITCH is set to the ON
position.
IMPORTANT
: Double check the connection between the Right and the Left Speaker. The
HF and LF Cables should be accurately connected. If not, then it can cause speaker
damage.
Please contact Saber Audio Customer Service for any queries/concerns.
Saber Audio | Handcrafted | Transmission Line Speakers
