MOBILIFT ECO 650
18
Montaż telewizora do podnośnika
7. Using the screws, attach the horizontal beams to the back of the TV (fig. 7
– you can use the
screws supplied with the TV or select the screws in accordance with the TV producer's
recommendation).
8. Hang the TV with mounted vertical beams on the lift
(rys. 8).
fig. 7
STEP 1: Tighten the brackets
to the horizontal beams
STEP 2: Attach horizontal beams to
the back of the TV.
KROK 1
Set clamps on lifts
body on distance "A"
corresponding to the arms
setup on TV. After setting
secure the clamps by tightening
screws as on drawing.
STEP 2: Hang the screen
with arms and brackets on
the clamps. Make sure that
the screen sits firmly and
evenly on the lifts body.
STEP 3: Tighten the
brackets and all the
corresponding screws.
fig. 8
