• Dusts behind the refrigerator and on the ground shall be timely
cleaned to improve the cooling effect and energy saving�
• The interior of the refrigerator should be cleaned regularly to
avoid odor�
• Check the door gasket regularly to make sure there are no debris�
• Please turn off the power before cleaning, remove all food,
shelves, drawers, etc�
• Clean the door gasket with mild soap and water� Use a soft
cloth or sponge to clean the inside of the refrigerator, with two
tablespoons of baking soda and a quart of warm water� Then
rinse with water and wipe clean, and open the door and dry it
naturally before the power is turned on�
• For areas that are difficult to clean in the refrigerator (such as
narrow sandwiches, gaps or corners), it is recommended to
wipe them regularly with a soft rag, soft brush, etc� and when
necessary, combined with some auxiliary tools (such as thin
sticks) to ensure no contaminant accumulation in these areas�
• Do not use soap, detergent, scrub powder, spray cleaner, etc�,
as these may cause odors in the interior of the refrigerator�
• Clean the bottle frame, shelves and drawers with a mild
detergent and dry with a soft cloth�
• Wipe the outer surface of the refrigerator with a soft cloth
dampened with soapy water, detergent, etc�, and then wipe dry�
• Do not use hard brushes, clean steel balls, wire brushes,
abrasives, such as toothpastes, organic solvents (such as
alcohol, acetone, banana oil, etc�), boiling water, acid or
alkaline items clean refrigerator considering that this may
damage the fridge surface and interior� Boiling water and
benzene may deform or damage plastic parts�
• Do not rinse with water so as not to affect the electrical
insulation properties�
• It is advisable to clean the appliance regularly and to remove
any food deposits or splashes; in particular, clean the door
seals, recesses and adjacent parts�
• Don’t overlook parts of the appliance such as the humidity
controller, light casing, racks, egg and butter compartments,
ice cube tray, and all of the drainage areas, etc�
• If the appliance is not kept clean and in good condition, its
surface could deteriorate and inexorably affect the length of its
service life, and could lead to a dangerous situation�
• The appliance must not be steam cleaned�
• Use only a non-abrasive sponge, rinse with clean water then
dry thoroughly before putting the parts back in place�
• Never use abrasive cleaning products or hard metal scrapers
to clean the appliance, as they could scratch the surfaces and
break down the coating�
• After cleaning, leave the inside of the appliance to dry with the
door open before plugging it into the mains again�
• When re-stocking the appliance, be especially careful not to
hit, scratch, crack or break the internal surfaces�
57
56
GB
GB
