2. Quick operation guide
For detailed operating method read the corresponding content
on the instruction manual.
Switch on the
appliance
Open the door, Press the Power switch button
to switch on the appliance.
Fill the
detergent
dispenser
Compartment A:
With each wash cycle.
Compartment B:
For programmes with pre-
wash only.
(Follow the user instructions!)
Check the rinse
aid level
Mechanical indicator C.
Electric indicator on control
panel (if provided).
Check the
regeneration
salt level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control
panel (for some models), you can estimate
when to fill the salt into the softener by the
number of cycles the dishwasher has run.
Load the
baskets
Scrape off any large amount of leftover
food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher
loading instructions.
Select a
programme
Press the programme button until the selected
programme lights up. (See the section entitled
“Operation instruction”)
Running the
dishwasher
Close the door, turn on the water tap.
The machine will start working.
Changing the
programme
1. A running cycle can only be modified
if it has been running for a short time.
Otherwise the detergent may have already
been released and the water already
drained. If this is the case, the detergent
dispenser must be refilled.
2. Open the door slightly, then press the
program button more than 3 seconds to
cancel the running programme.
3. Select a new programme.
4. Close the door, restart the dishwasher.
70
69
GB
GB
