Saba CBI185-6519M, Руководство пользователя

Страница: 28 / 43

1 2 1 1
Installation
Kits for installation
Guide x 4
Guide Cover x 4
Slider x 4
Slider Cover x 4
Short Screw x 27 Long Screw x 2 Rubber Seal x 1
Middle Bracket
Cover x 2
4. Move middle bracket from left to right.
Then re-fit bottomdoor.
5. Re-fit middle hinge to left side. Ensure bottom door is
aligned horizontally and vertically, so that the seals are
closed on all sides before finally tightening the middle hinge.
6. Unscrew top hinge pin from the hinge. Then turn the hinge
over and screw hinge pin.
7. Re-fit upper door and then upper hinge on left side. Ensure
upper door is aligned horizontally and vertically, so that the
seals are closed on all sides before finally tightening the
upper hinge. If necessary, a spanner to tighten the hinge.
1. Unscrew the top hinge. Then lift the upper door and place it
on a padded surface to avoid scratching.
2. Unscrew middle hinge and then lift bottom door and place it
on a padded surface to avoid scratching.
3. Remove bottom hinge pin from right to left.