18
DiSEqC
DiSEqC: You can press [OK] and [Up/ Down] key to
switch options. There are several options for your
selection
:
a) Disable: without DiSEqC.
b) 1/2, 2/2: two ports DiSEqC
c) 1/4, 2/4, 3/4, 4/4: 4 ports DiSEqC
d) 1/8, 2/8… 8/8: 8 ports DiSEqC
e) 1/16, 2/16….16/16: 16 ports DiSEqC
Positioner
Positioner
：
In “Positioner” item, you can press
[Left/Right]key to switch “Off / DiSEqC 1.2 / USALS”
functions.
22K
You can use [Volume Up/ Volume Down] key to switch
“ON / Off”. When this item is switched to “ON”, receiver
will receive TV and radio input signal from 22K port. If
the item is switched to “Off”, the receiver will receive all
signal from 0K port.
! Notice
When you choose LNB type “Universal”, you can not
modify 22K.
Polarity
In “Polarity” item, [Left/Right]key to switch “Auto / H / V”
functions.
LNB Power
In “LNB POWER” item, you can press [Left/Right] key to
switch: ” On/Off” functions.
TP Edit
When you enter to “TP Edit” menu, there will display the
screen like below:
1
In “Satellite” item, press[Left/Right]key to switch
satellite that you want to scan or press[OK]key to
enter satellite list for selection.
2
In “TP Index” item, you not only can use
[Left/Right]key to select transponder but also can
use[Add] and [Delete]functions.
When you press[Green] key, it will display “New
TP” in “TP Index” item; You should set the
parameters of “TP Frequency” and “Symbol Rate”
for this new transponder. The parameters of “TP
Frequency” and “Symbol Rate” can set by number
keys. The available range are “3000~13450 MHz”
and “1000~45000Ks/s”
.
When you press[Yellow] key, there will show up a
warning message for reminding whether you will
delete the current transponder or not. If you select
