Black plate (72,1)
Saab 9-4X Infotainment System - 2012
72
Infotainment System
Back Track Mode
When selected, the back track
feature is on. See
“
BACK TRACK
”
earlier in this section.
Show 3-D Landmark
When selected, 3-D landmarks
display on the map screen.
Maps
This section includes basic
information needed to know about
the map database.
Map Coverage
The navigation maps are stored on
the hard drive.
For more information on map
coverage, see
.
Installing the DVD Map Disc
The factory installs the map
database information on the HDD.
An updated map disc can be used
to update the map database
information. See
in this section.
Before updating the map database
on the HDD, read the following
steps:
1. Start the vehicle to perform the
map updating.
2. Press VOL/
O
to turn the
system on.
3. Insert the map update disc into
the slot, label side up.
4. Press the Update button when
the Update Confirmation screen
displays.
5. Enter the Authentication Code,
then press Enter.
6. If the correct code is entered,
the system starts updating and
the status bar displays.
7. Press
X
after the map
database update is completed.
If the application update file is
included in the disc, the application
update is also done.
Handling the DVD Map Disc
.
Handle the disc very carefully to
avoid contamination or flaws.
Signals might not read out
properly.
.
Use a soft cloth if the disc gets
soiled and gently wipe it out from
the center of the disc to the
outside. Do not use cleaners or
solvents.
.
Do not use the disc to rest on
while writing or drawing using
any writing utensil or attach a
seal to any of the sides or
the disc.
.
Do not keep the disc in direct
sunlight, high temperatures,
or humidity.
.
Place the disc back into the
original case after use.
