12 788 466 13
Saab 9-3 4D M03-
48 Locate the green marked fibre optic cable by the
amplifier.
If there is no colour marking:
Follow steps 67
and 68 in these installation instructions, shine a
light onto the fibre optic cable by the amplifier
and check the fibre optic cables in the luggage
compartment in order to identify the correct fibre
optic cable. Mark the cable with a piece of tape.
49 Unplug the fibre-optic cable connector (the
small connector) from the amplifier connector.
50 Remove the fibre optic cable connected to
position 1 by opening the connector locking clip
and carefully lifting the hook.
51 Remove the protective cover from the connec-
tion on the extra fibre optic cable.
52 Fit the protective cover onto the removed fibre
optic cable connection and carefully move
the fibre optic cable aside in order to prevent
damage.
Important
Handle the fibre optic cables with care or the
signal may be distorted.
·
It is very important that the two leads in the
connector are not confused with one another.
·
Do not bend the cable in a radius smaller than
25 mm.
·
Keep the cable ends free from dirt and grime.
·
Do not expose the cable to impact as this may
cause the transparent plastic to whiten,
thereby reducing the intensity of the light and
causing possible communication interruptions.
·
The cable should not lie against any sharp
edges as this may cause increased signal
reduction.
F930A155
48
49
50
50
