SeismicAudioSpeakers.com
Facebook.com/SeismicAudio
Twitter.com/SeismicAudio
1-877-347-6423
Page 8
Connection Example 2
Standard 3-Pin XLR Microphone Cables (Male to Female)
Daisy Chaining Signal from one SA-15T-PW Amp to another SA-15T-PW Amp
This example shows how to connect two SA-15T-PW speakers to a standard Mixer using one MAIN OUT jack on
your mixer. By choosing this method, it will free up one main out jack on the mixing board and allow the SA-15T-
PW speakers to be Daisy Chained. This application requires (2) XLR 3 pin male to female cables. Seismic Audio
offers these cables. The model number is: SAXLX-25.
To start, take the female end of the first cable and insert it into the output jack labeled
MAIN OUT LEFT
on your
mixing board. Then insert the male end of the cable into the XLR input of the first or left SA-15T-PW speaker.
Second, insert the female end of the second XLR cable into the XLR output jack of the first SA-15T-PW. Lastly,
insert male end of the XLR cable into the XLR input jack on the second SA-15T-PW speaker.
