S2Konnect N-3020SX Скачать руководство пользователя страница 22

S2Konnect N-3020SX

22

Appendix A. License and Warranty Information

The Americas, Asia, Australia, New Zealand, Pacific

Dear Customer,

if you acquired your S2Konnect product in the UNITED STATES, CANADA or any other country in the AMERICAS, ASIA, AUSTRALIA, NEW ZEALAND, PACIFIC, the 

following license and purchase agreement applies to you.
This is a legal agreement between you, the end user and S2Konnect Incorporated in Ettlingen/Federal Republic of Germany.

S2Konnect GmbH. License and Purchase Agreement

By opening the sealed disk package and taking possession of the hardware, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of 

this Agreement, promptly return the unopened and unused disk package and hardware with the accompanying items (including all written materials and other accessories) 

to the place of purchase for a full refund.

Grant of Software License

T

his S2Konnect GmbH License Agreement (License) permits you to use one copy of the S2Konnect GmbH software product acquired with this License (“SOFTWARE”) on 

any single computer, provided the SOFTWARE is in use on only one computer at any time. If you have multiple Licenses for the SOFTWARE, then at any time, you may 

have as many copies of the SOFTWARE in use as you have Licenses. The SOFTWARE is “in use” on a computer when it is loaded into the temporary memory (i.e. RAM) 

or installed into the permanent memory (e.g. hard disk or other storage device) of that computer, except that a copy installed on a network server for the sole purpose of 

distribution to other computers is not “in use”. If the anticipated number of users of the SOFTWARE will exceed the number of applicable Licenses, then you must have 

a reasonable mechanism or process in place to assure that the number of persons using the SOFTWARE concurrently does not exceed the number of Licenses. If the 

SOFTWARE is permanently installed on the hard disk or other storage device of a computer (other than a network server) and one person uses that computer more than 

80% of the time it is in use, then that person may also use the SOFTWARE on a portable or home computer.

Copyright

The SOFTWARE is owned by S2Konnect GmbH or its suppliers and is protected against copying by copyright laws, international treaty provisions and other national laws.
If the SOFTWARE is not copy protected you may either make one copy of the SOFTWARE solely for backup or archival purposes, or transfer the SOFTWARE to a single 

hard disk provided you keep the original solely for backup or archival purposes.
You may not copy the Product Manual(s) or written materials accompanying the SOFTWARE or HARDWARE.

Other Restrictions

You may not rent or lease the SOFTWARE or HARDWARE, but you may transfer your rights under this S2Konnect GmbH License and Purchase Agreement on a permanent 

basis provided you transfer all copies of the SOFTWARE and all written materials, and the recipient agrees to the terms of this Agreement.

You may not reverse engineer, decompile or disassemble the SOFTWARE. Any transfer must include the most recent update and all prior versions.

Hardware

S2Konnect GmbH warrants, that the hardware will be delivered free from defect and in working condition. S2Konnect GmbH does not assume liability for nor warrant damage 

to the hardware after delivery. S2Konnect also does not warrant total applicability for specific applications or customer network environments.

Limited Warranty for Hardware and Software

Limited Warranty

S2Konnect warrants that the SOFTWARE will perform substantially in accordance with the accompanying Product Manual(s) for a period of 90 days from the date of receipt. 
S2Konnect warrants that NETWORK INTERFACE CARDS will be free from defects in materials and workmanship under normal use and service for a period of 2 years from 

the date of receipt, that NETWORK INFRASTRUCTURE COMPONENTS (e.g., hubs, Switches, concentrators) will be free from defects in materials and workmanship under 

normal use and service for a period of 2 years from the date of receipt, and other HARDWARE for a period of 6 months from the date of receipt respectively.
This warranty is given by S2Konnect as producer of the PRODUCT; possible legal warranty or liability claims against the dealer, whom you have acquired your SOFTWARE 

or HARDWARE product from, shall neither replaced by nor limited through this warranty.

Customer Remedies

S2Konnect’s entire liability and your exclusive remedy shall be, at S2Konnect’s option, either return of the price paid, or repair or replacement of the SOFTWARE or HARD-

WARE that does not meet S2Konnect’s Limited Warranty and which is returned to S2Konnect GmbH with a copy of your receipt. This Limited Warranty is void if failure of 

the SOFTWARE or HARDWARE has resulted from accident, abuse, or misapplication. Any replacement SOFTWARE will be warranted by S2Konnect GmbH only for the 

remainder of the original warranty period or 30 days, whichever is longer. Any replacement HARDWARE will be warranted for the remainder of the original warranty period 

or 6 months, whichever is longer.

No other Warranties

S2Konnect GmbH disclaims all other warranties or liabilities with respect to the SOFTWARE, the HARDWARE, the accompanying Product Manual(s) and other written 

materials and any other accessories.

No Liability for Consequential Damages

S2Konnect GmbH does not warrant the software and hardware for a specific application, nor does S2Konnect GmbH accept any consequential damages due to the use of 

the hardware or software. S2Konnect GmbH and its suppliers shall not be liable for any other damages whatsoever (including, without limitation, damages for loss of bu-

siness profits, business interruption, loss of business information or data, property loss or other financial loss), arising out of the use of or the inability to use this S2Konnect 

GmbH product, even if S2Konnect GmbH has been advised of the possibility of such damages. In any case, S2Konnect’s entire liability shall be limited to the amount actually 

paid by you for the product.

Other

This agreement is governed by the procedural and substantive laws of the State California, U.S.A.. UN Trade Laws shall not be applicable in any case.
Should individual stipulations of this Agreement be or become invalid, this invalid stipulation shall be replaced by a stipulation, which is as close as possible to the invalid stipulation.
Should you have any questions concerning this Agreement, or if you desire to contact S2Konnect GmbH for any reason, please use the address information enclosed in this 

product or write to: S2Konnect GmbH, Siemensstrasse 23, 76275 Ettlingen, Germany.

U.S. Government Use

Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in FAR § 52.227-14 (June 1987) Alternate III(g)(3) (June 1987), FAR § 

52.227-19 (June 1987), or DFARS § 52.227-7013 © (1) (June 1988), as applicable. Contractor / Manufacturer is S2Konnect.

Содержание N-3020SX

























Отзывы: