S2Konnect N-2020T, Руководство пользователя

Страница: 9 / 20

S2Konnect N-2020T
9
Connection of the S2Konnect Network Card
This chapter describes the physical connection of the S2Konnect N-2020T 10/100/1000Base-T
Network Interface Card to a network system.
Transmission Distances
All ports of the N-2020T are supporting 10/100/1000BaseT connections on Copper Category 5
unshielded twisted pair cable with a maximum distance of 100m.
Connection to the Network
You can connect the S2Konnect N-2020T 10/100/1000Base-T Network Interface Card to a
network station or even uplink them to a network server. Thus, by connecting smaller network
segments through a switch you can expand the transmission range of your overall network.
In order to connect the S2Konnect Network Card to a network, proceed as follows:
1. If possible, disconnect Switches from the power supply.
2. At one end of the cable connect the RJ-45 connector to the port on the S2Konnect
Network Card.
4
Figure 1. Connection of the RJ-45 / plug
B
LI
NK
ACT
1000
100
10
Port
B
Port
A