background image

 

- 2 - 

 

 
 

FCC INFORMATION 

This device complies with Part 15 of the FCC Rules.  Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation. 

In accordance with FCC requirements, changes or modifications not expressly approved 
by manufacturer could void the user’s authority to operate this product. 
This device generates and uses radio frequency (RF) energy, and if not installed and used 
properly, this equipment may cause interference to radio or television reception.  If this 
equipment does cause interference to radio or television reception (which you can 
determine by unplugging the unit), try to correct the interference by one or more of the 
following measures: 

  Reorient the receiving antenna (that is, the antenna for the radio or television that is 

“receiving” the interference. 

  Move the unit away from the equipment that is receiving interference. 

  Plug the unit into a different wall outlet so that the unit and the equipment receiving 

interference are on different branch circuits. 

If these measures do not eliminate the interference, please consult your dealer or an 
experienced radio / television technician for additional suggestions.  Also, the Federal 
Communications Commission has prepared a helpful booklet,  “How to identify and 
Resolve Radio TV interference Problems.”  This booklet is available from the U.S. 
Government Printing Office, Washington, DC 20402.  Please specify stock number 004-
000-00345-4 when ordering copies. 
 

FOR YOUR SAFETY 

The AC power plug is polarized (one blade is wider than the other) and only fits into AC 
power outlets one way.  If the plug won’t go into outlet completely, turn the plug over and 
try to insert it the other way. If it still won’t fit, contact a qualified electrician to change the 
outlet, or use a different one.  

Do not attempt to bypass this safety feature.

 

 
 
 

 

 

   

   

 

 

CAUTION 

 

 

 

 

RISK OF ELECTRIC SHOCK  

DO NOT OPEN 

 

!

 

 

 

   

 

 

WARNING:

 TO PREVENT FIRE OR 

ELECTRIC SHOCK HAZARD. 
DO NOT EXPOSE THIS PRODUCT 
TO RAIN OR MOISTURE. 

THE LIGHTNING 
FLASH AND ARROW-
HEAD WITHIN THE 
TRIANGLE IS A 
WARNING SIGN 
ALERTING YOU OF 
DANGEROUS 
VOLTAGE INSIDE 
THE PRODUCT. 

  CAUTION: TO REDUCE THE 

RISK OF ELECTRIC SHOCK.  
DO NOT REMOVE COVER 
(OR BACK).  NO USER 
SERVICEABLE PARTS 
INSIDE.  REFER SERVICING 
TO QUALIIED SERVICE 
PERSONNEL. 

  THE EXCLAMATION 

POINT WITHIN THE 
TRIANGLE IS A 
WARNING SIGN 
ALERTING YOU OF 
IMPORTANT 
INSTRUCTIONS 
ACCOMPANYING THE 
PRODUCT. 

 

SEE MARKING ON BOTTOM / BACK OF PRODUCT

 

Содержание COCR-015

















Отзывы: