S-TEC ST 360 ALT, Руководство по эксплуатации для пилотов

Страница: 14 / 36

2nd Ed. Jan 15, 08 2-3
S–TEC
ACTION RESPONSE
1. Set Battery Master Switch to ON
position. ------
2. Set Avionics Master Switch to ON
position. ------
3. Set Transponder Master Switch to
ON position. ------
4. Set Encoding Altimeter / Blind
Encoder Master Switch to ON
position. ------
5. Set Autopilot Master Switch to ON
position. ------
6. Complete Autopilot Pre-Flight
Procedures contained in respective
POH.
------
7. Set ALT Alerter Master Switch to
ON position. A two-tone audible alert sounds once.
All left numeric segments, all right
polarity / numeric segments, and all
annunciations (ENT, ALT, SEL, ALR,
DH, VS, BARO) appear on Selector /
Alerter display for 5 seconds, as
shown in Fig. 2-1.
Thereafter, only ENT annunciation
and left numeral 29.9 (barometric
pressure in inches mercury) appear,
along with a flashing BARO
annunciation, as shown in Fig. 2-2.
2.1 Pre-Flight Test
Prior to takeoff and with engine running, perform the actions shown in Table 2-1.
For each action, verify the corresponding response where applicable.
Table 2-1. Pre-Flight Test (continued on page 2-4)