S+S Regeltechnik KINASGARD RBWF-UP, Инструкции по эксплуатации, монтажу и установке

Страница: 6 / 16

G
KINASGARD ® RBWF - UP
The motion sensor KINASGARD
®
RBWF-UP detects the presence of persons
and motions and has a switching output (normally open). The room motion
sensor is used for the observation and recognition of conditions and for the
motion-dependent control of room functions, e.g. for lowering temperatures in
unused rooms. This motion sensor is used for in-wall installation in corridors,
in offices, in residential rooms and business facilities in connection with light
switch programmes. The sensor detects motions over an aperture angle of
110° and a perimeter of 360°. Because of the patented lens system with
20 individual lenses, only very small dark areas are resulting, which even at a
distance of 10 m are only a few centimeters wide, safely detecting also small
motions.
TECHNICAL DATA:
Power supply: .............................. 24 V AC ⁄ DC
Sensor: ......................................... infrared motion sensor
Detection range: ........................ perimeter 360°, aperture angle 90° ⁄ 110°,
reach ca. 10 m, circular
Motion detection: ....................... of persons and objects, necessary temperature
difference between subject and ambience ≥ 5 K
Output: ......................................... without ⁄ with motion,
potential-free changeover contact 24 V
After-running time: .................... adjustable from 4 s to 16 min
Ambient temperature: .............. 0 …+ 50 °C
Enclosure: .................................... plastic
Mounting: ..................................... in in-wall flush box Ø 55 mm, in-wall
Electrical connection: ................ 0.14 - 2.5 mm², via plug terminals on circuit board
Protection class: ........................ III (according to EN 60 730)
Protection type:.......................... IP 20 (according to EN 60 529)
Standards: ................................... CE conformity,
electromagnetic compatibility
according to EN 61 326 + A1 + A2,
EMC directive 2004 ⁄ 108 ⁄ EC
SWITCH PROGRAMME:
Manufacturer:............................. Busch-Jaeger Reflex Si
(other switch programmes, manufacturers,
colours and prices upon request)
Enclosure: .................................... plastic, standard colour alpine white (similar RAL 9010)
(other colours are possible on request with colour variants depending
on the respective light switch programme)
Schematic diagram RBWF - UP
Type ⁄ WG1 Detection Output
Presence ⁄ Motion
RBWF - UP - S Yes ⁄ No Normally open contact
2 2 1 1
5 5 6 6
3
3
4
4
UB +
UB -
GND
GND
(closing when motion
is detected)
Normally open
contact 1 contact 2